ASSEMBLY

INITIAL RUN

A.Check that the motor hoses are connected together.

B.Run tractor engine at idle speed and engage PTO drive.

C.Increase PTO speed gradually up to 360 rev/min.

D.The pump will start operating during run-up. Flexing of the motor hoses and turbulence of the oil tank can be observed.

E.When pump is operating run system at 360 rev/min PTO speed for 10 minutes.

F.Check oil level. The oil level is correct when visible in the bottom of the filler assembly strainer.

BLEEDING RAMS

The ram cylinders at first will be full of air, therefore it may take some time for the cylinders to move after the control levers have been operated. Ensure sufficient space is available to allow for any unexpected movement of the arms.

Bleeding the First Ram

Due to the fact that the first arm can move past the vertical (overcenter) when fully raised, a restrictor may be fitted in the first ram hydraulic system to give a slow, controlled movement of the arm past center. It is essential that the first ram is fully bled to prevent fall back to the arm when the arms are stretched out and taken past vertical.

NOTE: The following instructions must be carried out before any attempt is made to raise more than one arm at a time.

A.Engage PTO drive with tractor engine at idle speed.

B.Increase PTO speed to 360-400 rev/min.

C.Fully retract second cylinder.

D.Fully retract the first cylinder.

E.Slacken hose connection at the bottom of the first cylinder.

G.Continue the bleeding until only clean, bubble-free oil is escaping from the fitting. Tighten fitting.

H.Open and close all cylinders to expel the air.

I.Check the oil level in the tank/tractor hydraulic oil reservoir and top up if necessary.

J.Check all hydraulic connections in the cylinder circuit for tightness.

WARNING! Do not raise more than one arm at a time until cylinders are completely free of air. Unex- pected movement of the arms can be dangerous.

RBF-12C 07-04

Assembly Section 3-14

© 2004 Alamo Group Inc.

 

Page 47 Page 49
Page 48
Image 48
Tiger Products Co., Ltd RBF-12C manual Initial RUN, Bleeding Rams, Bleeding the First Ram
Page 47 Page 49

RBF-12C specifications

Tiger Products Co., Ltd has consistently been at the forefront of innovation in the manufacturing industry, and their latest offering, the RBF-12C, exemplifies this commitment to excellence. The RBF-12C is a precision-built, high-performance industrial robot designed to enhance productivity and efficiency in various manufacturing processes.

One of the standout features of the RBF-12C is its impressive load capacity. With the ability to handle payloads of up to 12 kilograms, this model is perfect for applications requiring both strength and precision. This robustness makes it suitable for a range of tasks, including assembly, welding, and material handling.

In terms of technologies, the RBF-12C is equipped with advanced motion control systems. Its high-speed servo motors enable swift and accurate movements, minimizing cycle times while maximizing productivity. The robot's ability to achieve precise positioning is enhanced by its built-in feedback systems, which continuously monitor and adjust the robot's movements for optimal performance.

Another significant characteristic of the RBF-12C is its user-friendly interface. The robot comes with an intuitive programming environment that allows users to easily create and modify programs without needing extensive coding knowledge. This accessibility reduces the learning curve for new users and enables companies to integrate the RBF-12C into their existing workflows with minimal disruptions.

Safety is also a top priority with the RBF-12C. The robot is designed with multiple safety features, including collision detection and emergency stop functionalities, ensuring that operations are conducted smoothly without compromising worker safety. This makes the RBF-12C an ideal choice for environments where human-robot collaboration is essential.

Furthermore, the RBF-12C boasts a compact design, which allows for flexible deployment in confined spaces often found in modern manufacturing facilities. Its modular structure also means that it can be easily customized to meet specific operational requirements, accommodating various tools and attachments depending on the task at hand.

In conclusion, Tiger Products Co., Ltd’s RBF-12C robot stands out for its robust payload capacity, advanced motion control technologies, user-friendly programming interface, safety features, and compact design. These characteristics make it an invaluable asset for any manufacturing process looking to enhance efficiency and productivity while maintaining high standards of safety and adaptability.
Top Page Image Contents