ASSEMBLY

CONNECTING THE MOTOR

The connection of the hoses to the motor will determine the direction of rotation of the rotor shaft. As reverse rotation is standard on the machine, then the following instructions will apply to reverse rotation. For forward rotation the pipe connections on the motor are interchanged.

A.Locate the relief valve at the pump outlet.

B.Connect hose attached to port marked 'P' for pressure, to the bottom rear fitting on motor and tighten.

C.Connect hose attached to port marked 'T' for tank, to the top fitting on motor and tighten.

D.For forward rotation interchange these hoses.(Same as tractor tires)

NOTE: When fitting Cowl Bracket in different positions on the cowl rear beam it is important that the motor hose cannot be caught up between the Arm and rear of the Cowl. It may be necessary to reposi- tion the hose in hose clamps on the second arm.

MECHANICAL BREAKOUT

The RBF-12C is equiped with a mechanical breakout, which is fitted at the bottom of the kingpost attach- ment point in the mainframe. This will reduce the risk of damage if an obstruction is encountered during work. This breakout mechanism is pre-set at the factory and should not need any adjustment. If it is ever dismantled it is important that the disc springs are replaced in the correct sequence.

HOSE LAYOUT

It is important that hoses are fitted correctly. To ensure that there are no kinks, sharp bends and that the hoses do not chafe against sharp edges, the following layout should be used as a guide.

Twists

Hoses should never be twisted or kinked. On most hoses there is a line which runs the full length of the hose acting as a useful guide (see FIGURE 3-8). If there is no guideline running along the hose follow the fitting instructions below.

 

FIGURE 3-8

RBF-12C 07-04

Assembly Section 3-10

© 2004 Alamo Group Inc.

 

Page 43 Page 45
Page 44
Image 44
Tiger Products Co., Ltd RBF-12C manual Connecting the Motor, Mechanical Breakout, Hose Layout, Twists
Page 43 Page 45

RBF-12C specifications

Tiger Products Co., Ltd has consistently been at the forefront of innovation in the manufacturing industry, and their latest offering, the RBF-12C, exemplifies this commitment to excellence. The RBF-12C is a precision-built, high-performance industrial robot designed to enhance productivity and efficiency in various manufacturing processes.

One of the standout features of the RBF-12C is its impressive load capacity. With the ability to handle payloads of up to 12 kilograms, this model is perfect for applications requiring both strength and precision. This robustness makes it suitable for a range of tasks, including assembly, welding, and material handling.

In terms of technologies, the RBF-12C is equipped with advanced motion control systems. Its high-speed servo motors enable swift and accurate movements, minimizing cycle times while maximizing productivity. The robot's ability to achieve precise positioning is enhanced by its built-in feedback systems, which continuously monitor and adjust the robot's movements for optimal performance.

Another significant characteristic of the RBF-12C is its user-friendly interface. The robot comes with an intuitive programming environment that allows users to easily create and modify programs without needing extensive coding knowledge. This accessibility reduces the learning curve for new users and enables companies to integrate the RBF-12C into their existing workflows with minimal disruptions.

Safety is also a top priority with the RBF-12C. The robot is designed with multiple safety features, including collision detection and emergency stop functionalities, ensuring that operations are conducted smoothly without compromising worker safety. This makes the RBF-12C an ideal choice for environments where human-robot collaboration is essential.

Furthermore, the RBF-12C boasts a compact design, which allows for flexible deployment in confined spaces often found in modern manufacturing facilities. Its modular structure also means that it can be easily customized to meet specific operational requirements, accommodating various tools and attachments depending on the task at hand.

In conclusion, Tiger Products Co., Ltd’s RBF-12C robot stands out for its robust payload capacity, advanced motion control technologies, user-friendly programming interface, safety features, and compact design. These characteristics make it an invaluable asset for any manufacturing process looking to enhance efficiency and productivity while maintaining high standards of safety and adaptability.
Top Page Image Contents