Timex M828 specifications Getting Started, Replace the battery lid. Turn clockwise to close

GETTING STARTED

1 Install the Watch Battery

Step 1: Peel Off Battery Protector

The battery has a protective covering and will not work unless the covering is removed. Simply peel off the covering using the tab and let the battery breathe (vent holes facing upwards) for 2 minutes before putting it into the watch.

Remove battery protector

Wait 2 minutes

Step 4: Replace Battery Lid

Replace the battery lid. Turn clockwise to close.

Battery Type: Size 675

The battery is a size 675 common zinc-air hearing aid battery, not a watch battery. Expected battery life will vary depending on watch and pager usage.

675 battery cell recommended.

Replace battery lid

Step 2: Remove Battery Lid

To remove the battery lid, turn the lid counterclock- wise by pushing against the raised portion of lid with fingers.

Remove battery lid

2	Use the SkyTel Services Guide to Connect
	With SkyTel

Open the enclosed activation guide. Review the materials. Call SkyTel and set up your paging service.

3 Set the Time on Your Watch

2

Step 3: Place Battery in Watch

Place the battery in the battery compartment

+(positive side) facing up.

IMPORTANT: Please remove expired batteries to prevent leakage.

Place battery in watch

With FLEXtime (see page 8), your watch will receive the time and date through the pager and automatically set itself. Or set it manually, (see pages 9-10).

4 Get to Know Your Watch Features

Open the chart on the inside back cover to get an overview of the watch modes and functions.

3