Timex T301 manual Operating the Dual Alarm System, Setting Radio Alarm, Setting Buzzer Alarm

Operating the Dual Alarm System

This clock radio features a dual alarm system, with two separate alarms that can be operated independently. The alarms can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio stations as an alarm wake sound, while the second features a buzzer wake sound. You can set the radio alarm, the buzzer alarm, or both alarms.

Setting Radio Alarm

1.Press the Alarm Set Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the Alarm Set Button, the display will stop flashing and you will need to press the Alarm Set Button again.

2.While the display flashes, press the Tuning/Set Buttons to set the wake time. Hold a button for a few seconds to advance the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.

3.After setting the radio alarm time, you will need to select the station to wake up to. First, press the AM/FM Button to select a radio frequency. Next, select a station using the Radio Preset Buttons. For more information on programming radio stations into memory, see the Programming Radio Station Settings section of this manual. Rotate the Volume Thumbwheel to set a wake sound volume level.

4.After setting the radio alarm wake time and sound, you will need to select your 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual. While the display is still flashing, press the Date/7-5-2 Button until the desired setting is shown.

5.After you have set the radio alarm wake time, wake sound, and 7-5-2 setting, press the Alarm Set Button twice so that the display shows the standard, non-flashing display.

Setting Buzzer Alarm

1.Press the Alarm Set Button twice. The display will flash and the Buzzer Alarm Indicator will appear.

2.While the display flashes, press the Tuning/Set Buttons to set the wake time, as described above.

3.	After setting the buzzer wake time, use the Date/7-5-2 Button to select the buzzer
	7-5-2 setting, as described above.
4.	After you have set the buzzer wake time and 7-5-2 setting, press the Alarm Set
	Button once so that the display shows the standard, non-flashing display.

8