Timex T622 Playing the Radio, Playing the MP-3 / Aux Line-in, Adjusting the Display Backlight

Playing the Radio

1.There are two ways to turn on the radio. Press one of the Radio Preset Buttons to listen to one of the preset stations, or press the H Music On/Off Button. The radio frequency will appear on the display.

2.Set the AM or FM band by pushing the S Radio Band Button to AM or FM.

3.Press either the 4 Radio Tuner - or G Radio Tuner + Button to find the station. Hold either button for a few seconds to scan the dial quickly.

Note:

•Extend the wire antenna for better FM reception.

•MP-3 Player may cause interference the radio reception. If interference occurs, turn off and unplug MP-3 Player from the radio.

4.Press 6 Volume + Button or 5 Volume - Button to adjust volume level.

5.Press H Music On/Off Button to Off to shut off radio.

Playing the MP-3 / Aux Line-in

1.Connect your CD / MP-3 Player or other devices to the MP-3 / Aux Line-in Plug.

2.Press the N MP-3 / Aux Line-in Button. 'AU' will appear on the display.

3.Press 6 Volume + Button or 5 Volume - Button to adjust volume level.

Note: To avoid distortion of sound, always set the volume level of the auxiliary device to a low or middle position, and adjust the desired volume level from the radio.

4. Press H Music On/Off Button to Off to shut off unit.

Adjusting the Display Backlight

This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To select a backlight setting, press the 1 Snooze / Dimmer Bar until desired brightness is reached.

6