Timex T622 Programming the Preset Radio Stations, Auto-Set Time Zones

2.Slide the O On/Off Lock switch to 'Off'. The unlock indicator will appear on the display.

3.Press the R Zone Button, the current Auto-Set Time Zone will flash. Press the

3 << Buttons and 9 >> Buttons to select your time zone. The display will show each zone's current time setting. There are seven zones

Auto-Set Time Zones

ATL : Atlantic Standard Time

EAS: Eastern Standard Time

CEN: Central Standard Time

MTN: Mountain Standard Time

PAC: Pacific Standard Time

ALS: Alaska Standard Time

HAI: Hawaii Standard Time

4.Press the J Enter Button.

Manual Time and Date Settings

1. To change the time setting, press the P Time Set Button once. The clock display will flash. Press the 3 << and 9 >> Buttons to set the time. Hold a button for a few seconds

to set the time rapidly. Be sure to set the correct AM or PM time, shown by the PM indicator (AM does not show).

2.Press the J Enter Button. The clock will beep twice and the display will stop flashing.

3.Press the Q Calendar Button. The current year setting will flash on lower right screen. Press 3 << and 9 >> Buttons to adjust. Press Q Calendar Button again and the current month/date will flash. Press 3 << and 9 >> Buttons to adjust then press the J Enter Button to exit.

Daylight-Saving Time and Leap Year Adjustments

This unit will automatically adjust the clock at the beginning and end of Daylight-Saving Time each year. It will also adjust the month/day display for leap year automatically.

This unit automatically advances one hour at the start of Daylight-Saving Time on the first Sunday of April, and moves back one hour at the end of Daylight-Saving Time on the last Sunday of October. If you live in an area that does not observe Daylight-Saving Time, it will be necessary for you (except Hawaii zone) to manually adjust the clock back one hour at the beginning of Daylight-Saving Time and forward one hour at the end of Daylight-Saving Time.

Programming the Preset Radio Stations

This unit has four Radio Preset Buttons for you to store and access your favorite stations quickly. It also includes 12 insert pictures for the buttons, each showing a different radio station format (Jazz, Country, Rock, etc.). You should prepare a list of four stations to program the settings.

1.Press the H Music On/Off Button to turn on the radio.

2.Set the AM or FM band by switching the S Radio Band Button to AM or FM.

3.Repeatedly press either the 4 Radio Tune - or G Radio Tune + Button to find the station. Press and hold the 4 Radio Tune - or G Radio Tune + Button for a few seconds and release. The radio will search up or down the dial and stop on the next strong station.

Note: Extend the wire antenna for better FM reception.

4.Press and hold a Radio Preset Button to set the station. The unit will beep twice.

5.Remove the clear button cover from a Radio Preset Button, place the corresponding paper insert onto the clear button cover.

6.Replace the clear cover.

Notes:

•Keep fluorescent lamps away from the unit, it may causes interference to the radio.

•Repeat steps 3 and 6 for the remaining three Preset Buttons.

•The Buttons on the right end are N MP-3/AuxLine-inand M CD Play/Pause Button.

7. Slide the O On/Off Lock Switch to 'On'. Replace the top panel cover and tighten the screw.

3