ENGLISH
TO SET THE 12-HOUR ALARM:
1)With the ALARM CROWN in the “D” position, TURN the ALARM CROWN or TURNING RING in either direction to set the hour and minute alarm markers. To activate the alarm to ring or vibrate at the desired time, PULL the ALARM CROWN out to the “E” position. A single beep sound and flash, OR a vibration will indicate that the
2)The alarm will sound and the dial will flash OR vibrate at the desired time (hour and minute) and will repeat every twelve hours unless the alarm is deactivated.
NOTE: Alarm is deactivated when the ALARM CROWN is in the “D” position.
If the alarm is not deactivated it will automatically stop ringing after 20 beeps and flashes OR stop vibrating, and will resume in 12 hours at the indicated time.
ENGLISH
TO SET THE HOURLY ALARM:
1)With the ALARM CROWN in the “D” position, TURN the ALARM CROWN or TURNING RING in either direction to set the minute alarm marker.
2)To activate the alarm to ring or vibrate at the desired minute, PULL the ALARM CROWN out to the “F” position. Three beeps sound and flash OR a vibration indicates the Hourly Alarm is activated.
3)The alarm will sound and the dial will flash OR vibrate at the desired minute and will repeat every hour on the specified minute unless the alarm is deactivated.
NOTE: Alarm is deactivated when the ALARM CROWN is in the “D” position.
If the alarm is not deactivated it will automatically stop ringing after 20 beeps and flashes OR stop vibrating, and will resume again in one hour at the indicated minute.
10 | 11 |
