Tissot through 141_EN14/14, 141_EN6/14, 141_EN5/14 manual Sensor Fault, Error the display is cleared

T-TOUCH EXPERT

*

SENSOR FAULT

When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor.

5 sec.

Error: the display is cleared Back to date display

If this happens, please contact your retailer.

WARNINGS

Battery type: button-type lithium-manganese dioxide primary battery cell.

To activate the functions on your T-TOUCH a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch.

The brightness of the digital display decreases when the hands are in motion.

In fast continuous setting mode, the display moves at a faster rate (e.g. for date function: months or years instead of days) than in non-continuous or normal speed setting mode (e.g. for date: days instead of months or years). To exit fast continu- ous setting mode, you need to release the push-pieces for 3 seconds to continue in normal speed setting mode.

The T-TOUCH is water-resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is not an instrument suitable for sports diving. You must not use push-buttons when the watch is underwater. None of the functions can be activated if the glass is in contact with a liquid.

Additional information in the "International Warranty – Service centers" booklet

w w w. t i s s o t . c h 14/14 1 4 1 _ E N