A | Appendix: Additional Setup Examples |
Plug in the DVR’s power cord.
Lights on the front panel show that it’s powered on.
Tune your TV (if necessary) to see the Welcome screen
Turn on your TV.
Tip: If you don’t see the Welcome screen, use the Input, Source, or TV/Video button on your TV remote or TV to select the correct audio/video source. Press the button until you see the Welcome screen.
Alternate: If you used a Coaxial RF cable in Step 
, tune your TV to the same channel (either 3 or 4) that the CHANNEL 3/4 switch on the back of the DVR is set to.
When you see the Welcome screen, you’re ready to begin Guided Setup, which customizes the DVR for your home. If you need help, visit www.tivo.com/setup.
