TOA Electronics 570, 570I

3EC17766 BAAA TCZZA Ed. 01

1 SpeedTouch™570 Installation

The configuration

procedure

Step Action

1Once the the SpeedTouch™ Setup wizard has detected the SpeedTouch™570

device you can proceed with the configuration procedure.

If more than one SpeedTouch™ device is listed, select the appropriate one.

Then, click Next to proceed.

Note If the SpeedTouch™570 has been configured before, it may be

protected by a system password. You must provide this password

before you can view the device details or continue with the config-

uration.

2The following window invites you to select the appropriate connection profile

for your Internet connectivity:

Select the connection profile and click Next to continue.

Note If the Service Provider included a separate disk with a dedicated

connection profile, click Have disk to navigate to the location of

the appropriate connection profile file.

3Subsequent screens will guide you through the configuration setup of both

your SpeedTouch™570 and/or your PC. Follow the instructions and enter the

required information where needed. This information should be provided by

your Service Provider.

4In final step all configurations will be applied to the SpeedTouch™570 and

your PC. You can follow the configuration progress in following window: