There are six main menus in the GUI:
Menu Tab | Description |
|
|
Personalize | Use this menu to set up your password, |
| device time and device name. You can also |
| abandon your personal settings by clicking |
| Restore Factory Settings. |
|
|
Internet | Use this menu to configure internet |
| connection settings, including |
| Authentication, Protocol, Firewall, and |
| Dynamic DNS. |
|
|
Status | Use this menu to display network status, |
| including WiMAX, Internet, LAN, and Device |
| Information. |
|
|
Port Forwarding | Use this menu to enable Universal Plug and |
| Play (UPnP) Internet Gateway Device (IGD) |
| profile to allow certain Windows |
| applications to setup the port forwarding |
| rule dynamically when NAT is enabled on |
| this device. |
|
|
Local Address | Use this menu to display the IP Address and |
| netmask address in the local network. |
|
|
Control Panel | Use this menu to manage the device |
| software. |
|
|
The following buttons appear at the bottom of each configuration page:
Button | Function |
|
|
Apply | Saves your changes. If you restart your |
| modem without saving your changes, all |
| changes are lost. After the device restarts, |
| the last saved configuration is used. |
|
|
Undo | Clears your changes on the current page |
| and returns to the main menu. Once you |
| click Apply, the Undo button will NOT clear |
| your changes. |
|
|
Next | Confirms the current setting and moves on |
| to the next screen. |
|
|
Refresh | Manually updates current status page. |
|
|
Auto Refresh | Updates automatically without needing you |
| to refresh manually. |
|
|
Wizard | Starts Setup Wizard manually if your |
| modem did not run the setup program |
| automatically. |
|
|
Note: Illustrations in this manual containing an image of what you see on your computer screen are for reference purposes only. Values shown in the illustrations in this manual may be different from what you see on your computer screen.
Section 2: Installation and Setup | 7 |
