TOA Electronics M-9000 manual Digital Matrix Mixer, Description, System Features

DIGITAL MATRIX MIXER

M-9000

DESCRIPTION

The TOA M-9000 Series Digital Matrix Mixer features a compact design that fits in a two rack space package. The versatile new Mixer is ideal for multi-zone paging, music distribution and room-combining applications.

The M-9000 includes eight module ports allowing designers to easily configure custom systems with up to eight mic/line inputs and eight outputs. The M-9000 chassis has two channels of built-in digital signal processing (DSP) with ten band parametric EQ, compressor, eight level ducking and more. Input and output modules provide additional DSP.

Two discrete operation modes, "Mixer" and "Matrix", allow the M-9000 to be used in both simple mixing and complex multi- zone paging applications. Versatile features include telephone zone paging, automatic microphone mixing and ambient noise control.

Modules include the D-001T dual channel mic/line input module, T-001T dual channel line output module, ZP-001T telephone access zone paging module, C-001T control expansion module, and AN-001T Ambient Noise Control module. Accessories include the AN-9001 ceiling/wall-mount microphone, ZM-9001 and ZM-9002 remote panels, and SS-9001 4-zone speaker selector.

SYSTEM FEATURES

■Modular Digital Matrix Mixer for a multitude of applications including audio-visual, zone paging, room combining and many more.

■Dual Modes (MIXER and MATRIX) — two separate feature sets to suit both simple mixing and complex multi-zone distribution applications.

■Easy to Configure and Operate

■Exceptional Audio Quality

•24-bit, 48 kHz sampling

•Low Distortion - 0.008%

■Modular System— up to 8 mic/line inputs and 8 outputs.

■Dual Channel Digital Signal Processor (DSP):

•10-Band Parametric EQ

•High and Low Pass Filters

•Compressor

•Loudness Contour

•Bass and Treble

•Delay (MIXER mode)

•TOA Speaker EQ Presets

•Additional DSP included on D-001T and T-001T modules

■Telephone Zone Paging— access up to eight zones with optional ZP-001T module

■Ambient Noise Control— automatically increase or reduce output levels in response to changes in ambient noise.

■Multi-function Display allows programming and operation without a PC.

■Rack-mount Kit Included (2RU) Flexible Remote Control

■Two Remote Volume Control Terminals

•Assignable to any input or output channel

•Control with 10k ohm linear potentiometer, 0-10 VDC or optional ZM-9001/ZM-9002 remote panels

•Assign remote volume control to background music (Priority 8) inputs without affecting paging input volume

■Four Control Inputs (expandable to twelve with C-001T module)– programmable to activate Memory, Volume Up/Down, Mute, Power On/Off, Emergency Mute

■Four Control Outputs (expandable to twelve with C-001T module) – programmable to activate external relays synchronized with Memory, Channel On/Off and Power On/Off

■RS-232 Port

•Control protocol available for external devices (see protocol for controllable parameters)

•AMX and Crestron control modules available

Additional Features

■Software Utility for saving unit parameters to PC,updating unit firmware, virtual control activation and status indication

■MS Excel Programming Templates – use Microsoft(R) Excel for off-site programming

■Keylock Security sets password-protected access to Input, Output, Utility & Power functions

■Input and Output Metering (D-001T module(s) required for input metering)

■Alphanumeric Channel and Memory Naming

■Power On Memory sets the Event/Scene selected when unit powers up

■Detachable AC Cable

	Rear View
	482
	466	6.1
	420
		76.2	88.4	107.6
	Front View
14	353
	335
	Side View	unit: mm