TOA Electronics M-9000 Ambient Noise Sensing, SS-9001 Speaker Selector, ZM-9001 Remote Panel

SS-9001Speaker Selector

The SS-9001 is a speaker selector used with the ZP-001T zone paging module. It outputs 2 input signals to 4 different zones.

Power Source	Supplied from the optional AD-246 AC adapter or an
	external 24 V DC/200 mA power supply.
Current Consumption	120 mA
Control Signal	No-voltage make contact nput (polarized),
	open voltage: 24 V DC, short-circuit current: 3 mA
Control Power	Under 240 W (70 V line)
Speaker Terminal	Removable terminal block (2 pins)
Control Terminal	Removable terminal block (10 pins)
Operating Temperature	-10°C to +40°C
Finish	Case: Surface-treated steel plate
Dimensions	112 (W) ⋅ 197 (H) ⋅ 30 (D) mm

ZM-9001Remote Panel

The ZM-9001 is a remote control switch panel used with the M-9000. It provides an additional 6 control inputs of amplifier expansion, and can be mounted in an American standard 1-gang electrical box in the wall.

Applicable Cable	Single conductor shielded cable
Line Resistance	Under 50 Ω (per line)
Terminal	M3 screw terminal, distance between barriers: 7.62 mm
Operating Temperature	-10°C to +40°C
Finish	Surface-treated steel plate, white, paint
Dimensions	72 (W) ⋅ 127 (H) ⋅ 45 (D) mm
Weight	170 g
Accessory	Box mounting screw ⋅ 2, Panel mounting screw ⋅ 2

Note: Since no electrical box is supplied with the unit, prepare it separately.

Weight	530 g
Accessory	Removable terminal plug (2 pins) ⋅ 6, Removable terminal
	plug (10 pins) ⋅ 1, Cord clamp ⋅ 1, Mounting screw ⋅ 4
Option	AC adapter: AD-246

157 177 197

72

33

66.4 97 127

38

42

45
37	32.6

70	66	83.5	97	104
6	Front view
	without panel
				Unit: mm
1-gang electrical box
(not supplied)
83.5	90 – 98

46 – 50

1
		18	70	18	10
	30		112			Unit: mm

Figure when mounted Dimensions of mounting opening

If the opening is too small or too large, the ZM-9001 cannot be mounted in the wall. Be sure to make an opening with dimensions given above when mounting.

Ambient Noise Sensing	ZM-9002Remote Panel
AN-9001Microphone

The AN-9001 is an electret condenser microphone designed for ambient noise sensing. It is used in conjunction with the AN-001T Ambient Noise control module in the M-9000. It can be mounted in an American Standard 1-gang electrical box in the ceiling or wall.

Type	Electret condenser microphone
Phantom Power	14-26 V DC
Current Consumption	7 mA (at 24 V DC)
Directivity	Omnidirectional (hemispherical)
Impedance	200 Ω
Rated Sensitivity	-5 dB (1 kHz, 0 dB = 1 V/Pa)
Frequency Response	100-10,000 Hz
Output Terminal	Removable terminal block (3 pins)
Operating Temperature	-10°C to +40°C
Finish	Panel: ABS resin, white
	Frame, Case: Surface-treated steel plate

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.

Applicable Cable	Single conductor shielded cable
Line Resistance	Under 50 Ω (per line)
Terminal	M3 screw terminal, distance between barriers: 7.62 mm
Operating Temperature	-10°C to +40°C
Finish	Surface-treated steel plate, white, paint
Dimensions	72 (W) ⋅ 127 (H) ⋅ 56 (D) mm
Weight	170 g
Accessory	Box mounting screw ⋅ 2, Panel mounting screw ⋅ 2

Note: Since no electrical box is supplied with the unit, prepare it separately.

Dimensions	ø130 ⋅ 37 (D) mm
Weight	170 g
Accessory	Removable terminal plug (3 pins) ⋅ 1,
	Box mounting screw (No.6-32UNC x 30) ⋅ 2,
	Box mounting screw (M4 x 30) ⋅ 2
Option	9000 series plug-in module: AN-001T

Note: Since no electrical box is supplied with the unit, prepare it separately.

72

33

66.4

97

127

56

37

70

32.6

66 83.5 97 104

ø130

70

31

37

38

42

6

Front View without panel

Unit: mm

1-gang electrical box (not supplied)

83.5 90 – 98

46 – 50

38

42

70 83.5 104

70

Front view

without panel

	1-gang electrical box
	(not supplied)
	83.5 90 – 98
	46 – 50
Figure when	Dimensions of mounting
mounted	opening
	If the opening is too small or
	too large, the AN-9001
	cannot be mounted in the
	ceiling or wall. Be sure to
	make an opening with
	dimensions given above
	when mounting.

Unit: mm

Figure when mounted Dimensions of mounting opening

If the opening is too small or too large, the ZM-9002 cannot be mounted in the wall. Be sure to make an opening with dimensions given above when mounting.