20

BROIL RECOMMENDATIONS

Broiling is used for tender cuts of meats or marinated meats, fish
and some fruits and vegetables. Cooking time is determined by the
desired doneness and the distance between the food and the
element. The following chart is to be used as a guideline.

BROIL TIME CHART

FOOD TOTAL COOK TIME*
Beef Steaks (3/4inch thick) 22 to 28 minutes
Ham Steak (1inch thick) 25 to 30 minutes
Fish Fillet 8 to 12 minutes
Fish Steak (1inch thick) 10 to 14 minutes
Ground Beef (3/4inch thick) 25 to 30 minutes
Hot Dogs 10 to 20 minutes
*Turn food halfway through cooking time. Broil times are
approximate and may vary depending on meat
NOTES: To speed up browning, brush lean cuts of meat, chicken
and fish with oil, margarine or melted butter. Broiling times
indicated are for fresh meat at refrigerator temperature.

HINTS FOR BROIL

•Do not place aluminum foil on top of Broil Insert. This traps
grease and can cause a fire.
•Trim excess fat from meat and score edges to prevent curling
and thaw frozen meats before broiling. This will reduce smoke
during broiling.

SETTING THE CLOCK

1. Plug unit into a 120 V AC electric outlet. Both the TIME and
TOAST Lights will be illuminated; 9:20 will appear in the
Display Window.
2. Press the CLOCK Button and 10:00 will appear in the Display
Window; the COLON (:) will begin to flash. Press the CLOCK
Button again; the “10” (HOUR) will begin
to flash. Press the Up ARROW or the
Down ARROW until the correct HOUR
including AM or PM appears in the
Display Window.
3. Press the CLOCK Button and the “00”
(MINUTES) will begin to flash. Press the
Up ARROW or the Down ARROW until
the correct MINUTES appears in the
Display Window.
4. Press the CLOCK Button. The COLON (:)
will begin to flash. The clock is now set.

CONVECTION OVEN FUNCTIONS

PROGRAMMING THE TOAST FUNCTION

Your Convection Oven will accommodate up to
6 slices of bread for toasting. The TOAST function
may also be used to top brown foods.
1. Plug unit into a 120 V outlet. Close the
Glass Door.
NOTE: When your Convection Oven is first
plugged in, it defaults to the TOAST function.
Both the TIME and TOAST Lights will be
illuminated, 9:20 will appear in the
Display Window.
2. Press the FUNCTION Button until the TOAST
Light illuminates and the selection is made.
Press the TIME/TEMP Button until the TIME
Light illuminates; 9:20 appears in the Display
Window; the center Toast Color Indicator Light
will be lit to indicate medium browning.
3. There are 5 possible preset browning colors/times. To change the
TOAST color/time, press the Up ARROW for a darker setting
(the Display will change time from 9:20 medium toast color to
11:00 darkest toast color) or press the Down ARROW for a
lighter setting (the Display will change time from 9:20 to 8:00 for
the lightest toast color).
Toast Color
Indicator Lights
11
Figure 6
TOAST Control
Panel Lights
9:20