OPERATING INSTRUCTIONS

CAUTION: Do not immerse Warming Tray, Cord or Plug into water or any other liquid.

IMPORTANT: Please treat the glass surface of this tray as you would any fine glass table top. Glass will scratch if not handled carefully. To prevent scratching, do not slide serving pieces on the glass. Care should be taken when using serving pieces or dishes that have a rough bottom. This is particularly true of ceramic ware. DO NOT use the glass as a cutting surface.

1.Before using for the first time: Carefully wipe the Warming Plate surface with a dampened cloth and mild detergent. Wipe dry with a soft cloth.

2.Place the tray on a flat, hard surface—like a countertop, buffet or table—at least 2 inches away from the wall and other surfaces. DO NOT place on an unsteady or cloth-covered surface. Air must cir- culate freely under the Warming Plate.

3.Insert the Detachable Power Cord into the Power Cord Socket (see FIGURE 1); then plug into a 120V electrical out- let. The Warming Tray will

start heating up as soon as the unit is plugged in.

4.Put the foods to be warmed into a warming/serving dish before placing onto the

Warming Tray. DO NOT place

FIGURE 1

food directly onto the glass

 

Warming Plate surface.

 

NOTE: Silver, china, pottery, ovenware, glass, and metal serving pieces are all appropriate. However, a flat-bottom dish will transfer the heat from the tray to the food more readily. DO NOT use plastic dishware!

NOTE: To keep foods from drying out, cover with aluminum foil until serving time. Be sure the foil cover does not drape over the sides and onto the Warming Tray.

4