OPERATING INSTRUCTIONS

•Make sure that the Juicer is completely and properly assembled.

(See ASSEMBLY INSTRUCTIONS.) The Filter Basket should be securely seated and the Pulp Basket at the rear of the Juicer, ready to catch pulp.

~ Helpful Tip ~

To reduce cleaning time, line the Pulp Basket with a plastic produce

bag (the kind you put your produce in at the grocery store).

•Place the Juice Pitcher underneath the Juice Spout.

•Plug the Juicer into a 120V AC electrical outlet.

•TO TURN THE JUICER ON:

Slide the Control Switch to the desired speed setting (“1” or “2”) and begin juicing. The Juicer will not operate if the Lid-Locking Lever is not properly engaged.

NOTE: You may alternate between speeds while juicing depending on the appropriate settings for the various produce being juiced. (Refer to Page 6 for suggested speed settings).

•Remove the Food Pusher from the Feed Tube.

•With the motor running, place produce into the Feed Tube.

•To re-insert the Food Pusher into the Feed Tube, the groove in the Food Pusher must aligned with the rib in the Feed Tube. Use the Food Pusher to gently direct food down the Feed Tube.

NOTE: To extract the maximum amount of juice, push the Food Pusher down slowly.

~ Helpful Tip ~

Try alternating the types of produce being juiced to ensure

maximum efficiency.

•TO TURN THE JUICER OFF:

Slide the Control Switch to “0”(OFF). Be sure to unplug the Juicer from the outlet when not in use.

9