Boiling Instructions (Cont.)
6.Plug the Power Base into 120V AC electrical outlet.
7.Press the ON/OFF Lever down, into the ON position, the Indicator Light will come on.
8.When the water comes to a boil the Kettle will automatically shut off and the Indicator Light will turn off.
NOTE: The Kettle can be turned off at any time during the heating process by using the ON/OFF Lever.
9.Remove the Kettle from the Power Base before pouring. NOTE: Always wait until the Kettle is off before removing it from the Power Base.
10.To reheat water, place Kettle back onto Power Base and press ON/OFF Lever down, into the ON position. Be careful not to spill any water onto the Power Base.
11.Unplug the Power Base when not in use. Allow it to cool before reuse.
Cleaning Your Kettle
CAUTION: Do not immerse Kettle or Power Base in any liquid or place in a dishwasher to be cleaned.
1.Raise the ON/OFF Lever into the OFF position and unplug unit. Allow unit to cool before cleaning.
2.Open the Lid by pressing the Lid Release Buttons together and lifting up (Refer back to Figure 3).
3.Remove the Scale Filter from inside the Kettle by pressing down on tab on the front of the filter inside of spout. (See Figure 4a).
Pull up and out from the Lid Opening. (See Figure 4b). Rinse under running water and use a soft brush if necessary (do not use a metal brush). Replace Scale Filter.
FIGURE 4a | FIGURE 4b |
6.Cordless Kettle Owner’s Manual