Toastmaster TMBL2 OPERATING INSTRUCTIONS (CONTINUED), HOT INGREDIENTS

OPERATING INSTRUCTIONS (CONTINUED)

NOTE: Do not fill the Blending Jar more than the MAX fill line (500ml). Never operate when the Blending Jar is empty.

CAUTION: Never place the Blade Assembly on the Motor Housing without the Blending Jar being completely assembled and securely tightened.

4.Place Blending Jar Lid with Cap on Blending Jar. Remember: Always hold Lid in place during processing.

5.Plug the power cord into a 120V AC electrical outlet. Press and hold the Control Button. Blend until ingredients have reached desired consistency.

CAUTION: If Blending Jar rotates during blending, immediately release the Control Button, then secure by turning until the Blending Jar locks into place as described in the BLENDER ASSEMBLY INSTRUCTIONS.

•Do not touch Blades

•Do not interfere with the Blade movement

•Do not remove Blending Jar Lid

6.When blending is completed, release the Control Button to stop the Blender, and unplug the unit.

HOT INGREDIENTS

CAUTION: Use extreme caution when blending hot liquids to avoid accidental scalding or burns. Do not use your hand to cover opening!

NOTE: When processing hot foods, always remove the Cap from the Lid before beginning.

•DO NOT put more than 2.5 ounces of hot ingredients into the Blending Jar before beginning to blend.

•After the blending process has begun, you may slowly add up to an additional 2.5 ounces of hot ingredients through the cen- ter hole in the Lid.

•Always use a vessel with a pouring spout when adding hot ingredients.

6