OPERATING INSTRUCTIONS

Before First Use

1.Remove all packaging materials from the Ceramic Soleplate and the body of the Iron. Unwind and straighten the power cord.

2.Flush the Steam Vents using the Self-Clean function (see USER MAINTENANCE INSTRUCTIONS).

NOTE: When the Iron is used for the first time, you may notice a slight amount of smoke; this is normal and will stop after a few minutes as the Iron continues to heat.

Using as a Dry Iron

The Iron can be used on the dry setting with or without water in the Water Tank. However, it is best to avoid having water in the Water Tank while dry ironing.

1.Turn the Temperature Control Dial to the “min” position and the Steam Control Dial to the “X” (no steam) position.

2.Stand the Iron in the vertical position (on its Heel Rest) on a heat resistant surface and plug into a 120V outlet. An audible beep will sound and the Water Tank will glow blue.

3.Turn the Temperature Control Dial to the desired setting (See FIGURE 4 for basic fabric/temperature guidelines or check the condensed fabric guide imprinted on the Heel Rest of the Iron.) The red Thermostat Light will illuminate, indicating that the Iron is heating.

NOTE: For best results, check garment labels for the temperature setting recommended by the fabric manufacturer.

4.As the Iron is heating, the Water Tank will cycle through each color until the desired setting is reached. Once the Iron has reached the set temperature, an audible beep will sound and the red Thermostat Light will go off, indicating that the Iron is ready for use.

NOTE: The red Thermostat Light will continue to cycle off and on during use as the Iron maintains the desired temperature.

5.When changing from a higher temperature setting to a lower temperature setting, the Water Tank will cycle down through the colors until the Iron has cooled to the proper ironing temperature. When this occurs, the color of the Water Tank will correspond with the new temperature setting, indicating that the Iron is ready for use.

6.When finished ironing, turn the Temperature Control Dial to the “min” position and unplug the Iron. Stand the Iron back in the vertical position (on its Heel Rest) and allow it to cool completely before cleaning or storing.

WARNING: Never fill the Water Tank while the Iron is still hot.

5