Blast of Steam Button
FIGURE 7

9.When changing from a higher temperature setting to a lower temperature setting, the Water Tank will cycle down through the colors until the Iron has cooled to the proper ironing temperature. When this occurs, the color of the Water Tank will correspond with the new temperature setting, indicating that the Iron is ready for use.

NOTE: To quickly drop the temperature of the Iron, press the Blast of Steam Button.

10.When finished ironing, turn the Temperature Control Dial to the “min” position; turn the Steam Control Dial to the “X” (no steam) position, and unplug the Iron. If necessary, empty the Water Tank (see USER MAINTENANCE INSTRUCTIONS). Stand the Iron back in the vertical position (on its Heel Rest) and allow it to cool completely before cleaning or storing.

NOTE: The Water Tank should be emptied after each use.

Blast of Steam

The Blast of Steam Button releases a penetrating blast of steam to smooth out difficult wrinkles and to iron faster.

1.When using the Blast of Steam feature, the Temperature Control Dial must be positioned to at least the “” symbol -- located midway between the GREEN (• •) and LILAC (• • •) settings. For best results, use the “max” (RED) temperature setting

and keep the Water Tank at least half full.

2. Firmly press the Blast of Steam Button once, then release (see FIGURE 7). It may be necessary to press the Blast of Steam Button 2 -3 times successively to release the initial burst. DO NOT HOLD THE BLAST OF STEAM BUTTON DOWN.

CAUTION: AVOID COMING IN CONTACT WITH

ESCAPING STEAM.

3. As the Blast of Steam Button is pressed and steam is released, the temperature of the Iron drops; thus the Water Tank color may cycle down momentarily. Allow at least

4 seconds between Blasts of Steam to allow the Iron to regain heat.

NOTE: The red Thermostat Light will continue to cycle off and on during use as the Iron maintains the desired temperature.

7