CHAPTER 2 – UNPACKING / INSTALLATION

Before using the machine please carefully read these instructions.

2.1. INSTALLATION

Carefully unpack the machine and check that all the parts are present (see Par. 1.1) and familiarise yourself with the controls (see Fig. 2).

2.2. POSITION OF THE MACHINE

Place the machine on a flat, even surface close to a wall socket in a well-lit environment. Ensure that the machine cannot be knocked over or cause injury and is out of the reach of children. Keep the machine away from sources of heat, very hot surfaces and open flames. Leave at least 30cm of space on either side of the machine so that you can operate all the controls safely (such as the steam arm).

2.3. CONNECTING TO THE ELECTRICITY SUPPLY

Before plugging the machine into the mains supply please check that the voltage indicated on the nameplate on the base of the machine matches the local power supply.

ATTENTION: The machine is intended for domestic use only. Please ensure that you have a suitable, earthed power supply.

If the mains cable becomes damaged or defective you must contact the retailer to arrange for a suitable replacement. The machine MUST NOT be used if the mains cable is, or appears to be, damaged.

11 – TONINO LAMBORGHINI EPS

Use and maintenance manual – Rev.01 - 07/2006