hand side of the casing and the single button on the left hand side are NOT depressed. Push the buttons in with your finger to ensure that they are not depressed.
2Plug in the mains cable to a suitable wall socket. Turn on the wall socket.
3Turn on the coffee machine by pressing in the on/off button which is located on the right hand side of the casing above the water button.
4Close the pod assembly by pushing the gearlever away from you until it locks into position.
5Press in the water button and you will hear the pump running. Wait until water starts to come out of the spout (see also note below).
6Press the water button again to stop the water flow.
7The machine is now primed and ready for use.
NOTE: If after a few seconds the pump is running but no water appears at the spout, switch off the machine and retry after a few minutes or just open the steam release knob for a few instant and retry.
ATTENTION: If you leave the machine turned on without any water being present in the boiler for a period of time it will cause irreparable damage which is not covered by the guarantee.
4.3. MAKING A CUP OF COFFEE
To make a cup of coffee with your Tonino Lamborghini machine proceed as outlined below:
1.Before plugging the mains cable in ensure that the two buttons on the right hand side of the casing and the single button on the left hand side are NOT depressed. Push the buttons in with your finger to ensure that they are not depressed.
2.Plug in the mains cable to a suitable wall
16 – TONINO LAMBORGHINI EPS | Use and maintenance manual – Rev.01 - 07/2006 |