4.5. DISPENSING STEAM

The steam arm can also be used to froth milk for capuccinos and to heat other drinks. Please see next paragraph for details.

ATTENTION: Do not make steam for longer than 30-60 seconds continuosly.

After steam production the boiler will re-fill with water (See recommendation in Par. 5.1).

4.5.1. Using steam to heat up a drink

CAUTION: The steam arm WILL BE EXTREMELY hot and you should move it by using the plastic lug located half way down the steam arm.

1Push in the Steam button on the left hand side of the machine

2The red LED light next to the button will come on

3Wait until the red LED light goes off which indicated that the water temperature in the boiler has reached 125°C

4Position the container under the steam arm.

5Slowly open the steam release knob.

6Close the steam release knob once the drink has reached the desired temperature.

7Push in the Steam button.

8Wait for the steam arm to cool down before cleaning it with a damp cloth (see par. 6.2)

ATTENTION: During the production of steam the container that the liquid is in will become very hot. It is therefore recommended that you use a container with a handle so your hands do not touch the side of the container. Metal containers should be used where possible.

4.5.2.Using the steam to froth milk for Cappuccino. Follow the steps below:

19 – TONINO LAMBORGHINI EPS

Use and maintenance manual – Rev.01 - 07/2006