1.Follow the steps in Par. 4.3 to make the coffee
2.Push in the Steam button on the left hand side of the machine
3.The red LED light next to the button will come on
4.Wait until the red LED light goes off which indicated that the water temperature in the boiler has reached 125°C
5.Fill 1/3 of the receptacle you want to use to make cappuccino with milk as the volume of the milk will expand.
6.Position the container under the steam arm.
7.Immerse the steam nozzle into the milk that you wish to froth and turn the steam knob slowly anticlockwise. Move the receptacle slowly up and down to achieve uniform froth.
8.When you have sufficient froth turn the steam knob fully clockwise to shut off the steam supply.
9.Push in the Steam button.
10.Wait for the steam arm to cool down before cleaning it with a damp cloth (see par. 6.2).
After you push in the Steam Button to stop generating steam there is a built in safety device which will prevent the machine from dispensing water until the boiler has refilled and the temperature of the water has dropped from 125 degrees back to 95 degrees. This is to prevent the machine from burning the coffee whilst the temperature of the water is too high (see par.5.1). Don’t forget the Steam button depressed.
20 – TONINO LAMBORGHINI EPS | Use and maintenance manual – Rev.01 - 07/2006 |