with a Microfibre cloth for cleaning the external chrome and polished steel surfaces. First clean the parts with a damp sponge or wet cloth before drying off with a soft cloth. Finally polish the parts with the Microfibre cloth. The Microfibre cloth is ideal for removing fingerprints. Do not use the microfibre cloth on the black painted surfaces.
6.5. CLEANING THE PAINTED SURFACES
It is only necessary to use cold water and a mild detergent to clean the sides of the coffee machine.
However, please note:
1 When cleaning the machine keep the machine out of direct sunlight and make sure the temperature is below 30 degrees C.
2Do not use steam from the machine to clean the surfaces.
3Use only mild detergents
4Do not use abrasive materials that may damage the paint
5Clean a small section of the surface to start with to ensure that there is no adverse effect on the metal before cleaning the whole machine.
6After using a mild detergent always wash it off with clean, cold water.
6.6.CLEANING THE WATER RESERVOIR
Periodically it is advisable to remove the water reservoir from the machine and to wash it in cold water. Do not use detergents to clean the inside of the water reservoir. The water used in the reservoir should be cold and ideally filtered or bottled (still) water.
6.7.REPLACING THE POD ASSEMBLY RUBBER SEALING RING
After making about 1000 cups of coffee it will be necessary to replace the orange rubber sealing ring above the pod holder assembly. Two spare seals are supplied with the machine. (see par. 1.1). To change the seal proceed as follows:
24 – TONINO LAMBORGHINI EPS | Use and maintenance manual – Rev.01 - 07/2006 |