Tonino Lamborghini Espresso Maker manual 17

socket. Turn on the wall socket.

3. Now turn on the coffee machine by pressing in the on/off button which is located on the right hand side of the casing above the water button. The on/off button has a circle with the numeral ‘1’ inside the circle. Both red LEDs will light up. The LED light on the right hand side indicates that the machine is ‘on’ and remains lit all the time that the machine is on. The LED light on the left hand side indicates that the machine is warming up and has not reached operating temperature. The LED on the left hand side will go off when the boiler has warmed up. This usually takes a few minutes.

4. Pull the gearlever on the right hand side towards you as far as it will travel to lower the pod holder assembly and the spout. Remove any used pod from the pod holder. Remove a fresh coffee pod from its wrapper and place it carefully onto the pod holder above the spout. Ensure that the pod is located centrally on the holder.

5. Close the pod holder assemblying by pushing the lever away from you until you feel some resistance. You now need to lock the pod assembly by pushing the lever further away from you until it will go no further. Please ensure that you have locked the pod holder assembly before you make a

	cup of coffee.
6.	Place a coffee cup on the machine under the
	spout. It is recommended that you pre-heat
	the coffee cup.
7.	When the red LED light on the left hand side
	of the machine has gone out this indicates
	that the machine is ready to make coffee.
8.	Press the water button (picture of cup and
	saucer on it) which is located below the
	on/off button on the right hand side of the
	casing. The machine will now make a cup of
	coffee.
9.	Press the water button once more to stop
	the flow of coffee from the spout. PLEASE
	NOTE the machine does NOT stop
	automatically and you must operate the
	water button when you have made a cup of
17 – TONINO LAMBORGHINI EPS	Use and maintenance manual – Rev.01 - 07/2006