1.3. DESCRIPTION OF CONTROLS
On/ Off button: Push the button to turn the machine on. The red LED light next to the button will come on to indicate that the machine is on. This LED will remain illuminated at all times when the machine is on. Push the button again to switch the machine off.
Hot water/ Coffee making button: Push the button to start making a cup of coffee or to release hot water through the spout (when there is no coffee pod in the machine). Push the button again to turn off the water supply.
Steam button: Push the button to prepare the machine to make steam (boiler temperature rises to 125°C). Push the button again to return to coffee making (boiler temperture reduces to 95°C). You cannot make coffee whilst the steam button is depressed as the water temperature will be too high. It takes a couple of minutes for the boiler to reach the correct temperatute for steam. It takes a couple of minutes for the temperature to drop back down after you turn the steam button off again.
Temperature Led Light: This red LED light is on the left hand side of the casing next to the steam button.
1Light on = Machine is in the process of heating up and is not yet ready. The boiler has not yet reached operating temperature.
2Light off = Machine is ready to make coffee. The boiler has reached operating temperature.
Steam release knob: Ensure that the steam arm is over the drip tray and slowly rotate the knob anticlockwise for a few seconds to discharge any residual water from the steam arm. Once the water has been discharged turn the steam off again by rotating the steam knob clockwise.
PLEASE NOTE: Do not use the steam supply for longer than about 1 minute at any one time (see Par 5.1).
7 – TONINO LAMBORGHINI EPS | Use and maintenance manual – Rev.01 - 07/2006 |