Gearlever handle: Located on right hand side of machine to open and close the pod holder assembly. Pull the lever towards you to lower the pod holder assembly and the spout. This allows the coffee pod to be placed on the holder. Push the lever away from you to raise the assembly before you make a cup of coffee. Push the lever until it locks into position. You should encounter some resistance as the lever locks. After you have made a cup of coffee pull the lever towards you to allow the pod to be taken out.
CAUTION: The pod holder will become hot during use and care should be taken when putting in and removing the pod to avoid getting scalded.
1.4. MARKING AND IDENTIFICATION OF THE PRODUCT The nameplate is located on the underside of
the base and shows details of the model and the voltage. Please check that the voltage supply matches the voltage specified on the nameplate before you start.
1.5. CONDITIONS OF GUARANTEE
The manufacturer provides a guarantees on the machine according to the laws.
If during the guarantee period the machine breaks down then it will be fixed and the broken part replaced on the following conditions:
1The fault is reported within the guarantee period.
2The problem is caused by a manufacturing defect or faulty material.
3The machine must be returned to the retailer to allow the necessary repair work to be done.
If your machine does not work properly please look at Chapter 7 – Troubleshooting – before contacting your retailer.
IMPORTANT: If you have to return the coffee machine for repair please do not send back the
8 – TONINO LAMBORGHINI EPS | Use and maintenance manual – Rev.01 - 07/2006 |