Top Innovations SF-777 instruction manual Ironing Tips and Techniques

Ironing Tips and Techniques

The SteamJet Station Iron is more efficient than older steam irons, conserving water and producing more powerful microbursts in a more focused way. The holes of the soleplate are closer together and are fewer than a conventional iron. This is international. By placing the steam holes close to the tip of the soleplate, like a professional ironing system, you are better able to direct concentrated bursts of steam to remove wrinkles. Instead of wetting whole areas of a garment, now you can concentrate on the problem area using less water than before. And because it is pumped cool and heated only to the point necessary to produce steam, it dries quicker when you apply the remainder of the soleplate in the ironing process. Now you can aovoid spotting, wet areas and stains altogether by using the Steamjet Station Iron.

ALWAYS allow the iron to heat up to the desired setting. Three to five

￿minutes for best results.

ALWAYS try to arrange your garments to be ironed from the most delicate fabrics, i.e. synthetics, to heavier ones like cotton. Irons take more time to cool down than to heat up and you cold have to wait while the iron cools.

NOTE: Be sure to check each garment’s label for proper ironing instructions.

Set the Temperature Control Dial at the minimum setting for any delicate

items.

Garments which use the lowest settings CANNOT be steam ironed. When the garment label indicates using a COOL setting, use the

￿MINIMUM setting.

When the garment label indicate using a WARM setting, use the setting that is proper for that particular fabric or blend. Check the Fabric Chart on

page 11 if you are unsure.

(Continued on next page.)

13