Clearing & Cleaning the Appliance
To CLEAR the iron if clogged or prior to storing:
STEP ONE
Turn the Temperature Control Dail to the maximum setting. Wait until the red indicator light shuts off.
STEP TWO
Hold the iron at arm’s length away from your body and any other surface. Point the tip of the iron at the floor being careful not to point the soleplate toward your body.
STEP THREE
Depress the Steam button for 5 seconds and release. Then raise your arm quickly so the metal soleplate is facing away from you. Press the Steam button for an additional 5 seconds and then release.
STEP FOUR
Wait half a minute and repeat the above process. This should clear the unit in preparation for storate or if clogged.
DANGER: Make sure that there is several feet of clear space in front and behind you since there may be a lot of steam released. It is desireable to clean the steam iron over a sink or basin.
To CLEAN the outside of the appliance:
STEP ONE
UNPLUG the appliance from the power source. Allow the iron to cool completely.
STEP TWO
Once cooled, place the iron face down on the
STEP THREE
Wipe the outside of all surfaces, except the metal soleplate of the iron, with a damp sponge. You may use mild soap or detergent for difficult to clean areas. DO NOT use abrasive cleansers as these will mar the plastic surfaces. You may dust the metal soleplate with a dry, clean cotton cloth.
9