Topcom 108MBPS Connection panel and LEDs, Configuring the PC to connect to the wireless router

Models: 108MBPS

1 100
Download 100 pages 59.48 Kb
Page 3
Image 3

ROUTER

1The connection panel and LED's

Topcom Wireless Kit 108Mbps

ENGLISH

Antenna

4LAN Ports

WAN Power Reset

POWER : The power port is to connect the 5V DC power adapter.

The power LED on the front panel will go ON when the power adapter is connected.

WAN : The WAN Ethernet port is to connect your ASDL/Cable modem.

The WAN LED will go ON if the network Ethernet cable is properly connected.

Ports 1- 4 : This is to connect up to 4 pc's or other network devices.

The LAN LED's will indicate the connection status.

Reset Button : To load default settings, press the reset button and hold it for 5 ~ 6 seconds. It will load the factory default settings for the device. Do not press the reset button unless you want to clear the current settings.

The STATUS LED and WLAN LED in the front panel will blink during normal operation.

2Configuring the PC to connect to the wireless router

The routers default IP address is : 192.168.1.1

DHCP server is ON

By default, your (Wireless) network adapter in the computer will be configured as DHCP- client : Obtain an IP address automatically.

These settings should be verified :

• Click Start button, then select the Control Panel

Topcom Wireless Kit 108Mbps

3

Page 3
Image 3
Topcom 108MBPS manual Connection panel and LEDs, Configuring the PC to connect to the wireless router