Topcom 108MBPS manual Verify your PCs IP configuration, Winipcfg for windows 95/98

Topcom Wireless Kit 108Mbps

3Verify your PC's IP configuration

As the connected computers are configured as DHCP-client, the router will provide an IP address to the computer when it is connected properly to one of the LAN ports (or Wireless by use of a wireless adapter).

To check if your computer received a LAN IP address, you can use the Windows utility.

This verification is only required in case you have problems to get connected to the router.

•WINIPCFG (for windows 95/98)

Click the Start button, select Run and type winipcfg. In the example below this computer has a IP address of 192.168.1.100 and the default gateway is 192.168.1.1. The default gateway should be the broadband router IP address.

ENGLISH

You can also type winipcfg in the DOS command.

•IPCONFIG (for windows 2000/NT)

Click the Start button, select Run and type cmd. Now the DOS screen will open. In the DOS command type IPCONFIG and press Enter. Your PC IP information will be displayed as shown below.

Topcom Wireless Kit 108Mbps 5