Topcom 125 Deskmaster 125 Deskmaster 125

Deskmaster 125 Deskmaster 125

If the memory is full, “Fu” appears on the display. If a third OGM is registered the

answering machine automatically switches to “Answering mode without possibil-

ity to leave a message”.

If no third OGM is registered the answering machine will only answer after 10

rings. You can command your answering machine by remote control and erase

messages.

Only if you have emptied th e memory by erasing messages, yo ur answering

machine will switch back to “Answering mode with possibility to leave a mes-

sage”.

In case of a po wer failure, th e answering m achine is in operative. The battery

saves the registered messages and settings. After the power failure has been

restored, your answering machine will operate as before again.

The battery can only save the registered messages and settings for a couple of

hours. If p ower failure lasts longer, these data will be lost and afterwards the

answering machine will switch to “Answering mode with possibility to leave a

message” with default OGM.

The answering machine is equipped with a detector which emits a warning sig-

nal when the battery is almost empty. In the latter case the selected OGM will

flash (An 1, An 2 or An 3 ). When the battery is still enough charged, the OGM is

lit permanently.

cally a pause during playback. You can resume message playback by pressing “1”.

6. After all messages have been played back, you will hear: “End of messages”.

7. You have 10 seconds to activate another feature.

e.g. Press “0” to erase all messages. You will hear: “All messages erased”.

8. To end remote control, press “3” or hang up.

1. Dial your telephone number.

2. After a few rings your machine will answer your call and emit the OGM. Press

# to stop OGM playback.

3. Enter your security code.

4. As soon as you hear the waiting signal, press “7”. You will hear: “Please record

announcement”.

5. After the beep tone, say your new OGM.

6. When you have finished your new OGM, press “7” again.

7. The machine will play back your new OGM automatically for checking.

8. Press “3” or hang up if your new OGM is OK.

1. Dial your telephone number.

2. After a few rings your machine will answer your call and emit the OGM.

Press “ # ” to stop OGM playback

3. Enter your security code

4. Press “2” , you will hear all possible remote control commands.

5. After the menu, enter a number to start a function or press “3” to stop.