Topcom 1300 Getting Started, Buttons, REMOVING/INSTALLING the Belt Clip, Battery Installation

TOPCOM TWINTALKER 1300

7GETTING STARTED

7.1 REMOVING/INSTALLING THE BELT CLIP

1.To remove the clip from the unit, push the belt clip (2) towards the antenna, while pulling the clip tab (1).

2.When re-installing the belt clip, a click indicates the BeltClip is locked into position.

7.2 BATTERY INSTALLATION

1.Remove the belt clip (§ 7.1).

2.Pull the battery door tab down (3) and slide the battery cover away from the antenna. (4)

3.Install 4 ‘AAA’ alkaline or rechargeable batteries following the polarity as shown.

4.Re-install the Battery Cover and Belt Clip (§ 7.1).

ENGLISH

8BUTTONS

SC

TX RX

1.ANTENNA 2.LCD Display 3.SPEAKER/MIC/CHARGER Connector

4.LOCK button 5.MONITOR button 6.CALL button

-Transmit a call tone 7.SPEAKER

8.MICROPHONE

9.DOWN button

-Decrease the speaker volume

-Select the previous item in the menu.

10.MENU button

- Enter menu.

11.PUSH TO TALK button PTT

-Press To Talk or release to listen

-Confirm a setting in the menu

12.UP button

-Increase the speaker volume

-Select the next item in the menu.

13.ON/OFF button

TOPCOM TWINTALKER 1300 5