5.2 Erase a recorded name from the Phone Book entry
- Press the Program/Call button once and you will see “PHONE
BOOK” on the display.
- Press the Up and Down buttons to search a number. If a name
is recorded to an entry, the recorded name will be pronounced
during the search!
- As soon as the number appears on the display, press the
Program/Call button a few times until you see ‘RECORD NAME’.
- Press the Erase button Ø twice to erase the recorded name from the
display entry.
6. outgoing messages (OGM)After the announcement of the name or the number, the Callmaster
220 will check whether an outgoing message has been programmed.
When an OGM has been programmed, the unit will play the message
to the caller.
The telephone has two outgoing messages (OGM): one general OGM
(G-OGM) and one special OGM ( -OGM). The general OGM (G-
OGM) will be played for each incoming call. The special OGM ( -
OGM) is for specific callers and will only be played for the numbers it
has been linked to (max. 16 numbers). All numbers from the Call List,
the Phone Book and the Direct/Indirect memory can be linked to this
special OGM.
6.1 Recording a general outgoing message (G-OGM)
• Press the Program/call button until RECORD G-OGM appears
on the display.
• Press and hold the Record button .
• Enter your message after the signal.
Callmaster 220
19
ENGLISH
HANDL CALLM 220_SCAN 13/3/02 4:42 pm Page 19