![](/images/new-backgrounds/1276570/27657021x1.webp)
TOPCOM BPM WRIST 2301
11.2PROCEDURE
1.Press the POWER button. All digits
will light up, checking the display functions. The checking procedure will complete after about 2 seconds.
2.After all symbols appear, the
display will show "0" with the designated Memory Zone. At this time,the monitor is "Ready to Measure".
3.Press the START button. Once the
monitor automatically inflates the cuff to approximately 180 mmHg, measurement will begin.
This monitor will
4. When the measurement is completed, systolic, diastolic and pulse will be shown simultaneously on the LCD screen.
When a mistake was detected during measurement the Error mark appears on the display
ENGLISH
11