TOPCOM BPM WRIST 2301
3TECHNICAL SPECIFICATIONS
Power source | 3V DC: Two LR03 (AAA) Alkaline batteries |
Measurement method | Oscillometric |
Measurement zone | Pressure: 20~280 mmHg |
| Pulse: 40~180 beats/minute |
Accuracy | Pressure: ±3 mmHg |
Pressure sensor | Pulse: within ±5% of reading |
Inflation | Pump driven |
Deflation | Automatic Pressure release valve |
Memory capacity | 30 memories for each zone |
3 minutes after last key operation : | |
Operation environment | 10°C~40°C(50°F~104°F) |
| 40~85% RH max. |
Storage environment | |
Weight | 10~95% RH max. |
130g (without batteries) | |
Wrist circumference | 13.5~19.5cm(5.3”~7.7”) |
Limited patient | Over 18 years old |
Dimensions | 81(L) x 78(W) x 78(H) mm |
K.B. | Short time operation 3 minutes. |
Classification | Classification of type BF |
|
|
* Specifications are subject to change without notice.
4HELPFULL TIPS
Here are a few helpful tips to help you obtain more accurate readings:
•Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring.
•Do not smoke or drink alcohol before measuring your blood pressure.
•You should not do be physically tired or exhausted while taking a measurement.
•It is important that you relax during measurement. Try to take 15- minutes rest before a reading.
•Do not take measurements if you are under stress or under tension.
•Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement.
•If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it.
•Wait about 5 minutes before taking the next pressure measurement.
ENGLISH
5
