10
TOPCOM TWINTALKER 3600
TOPCOM TWINTALKER 3600
Display 12.8 CHANNEL SCAN
CHANNEL SCAN performs searches for active signals in an endless loop
from channel 1 to 8, including CTCSS codes.
12.8.1 Activate channel scan
•Press the - button four times.
•Press the - button or the - button, until ‘Y’ is displayed, to acti-
vate scanning.
•Press the - button to confirm your selection.
•When activity on one of the 8 channels is detected the channel scan
will stop and you can listen to the conversation on this channel.
•Press the - button or the - button to skip the channel.
• If no button is pressed and no activity has been detected, the channel
scan will continue automatically after 5 seconds.
12.8.2 De-active channel scan
•Press the - button four times.
•Press the - button or the - button, until ‘-’ is displayed, to de-
activate scanning.
•Press the - button to confirm your selection.
12.9 KEY PAD LOCK12.9.1 Activate key pad lock
•Press the - button five times.
•Press the - button or the - button to activate the key pad lock.
The key pad lock icon is displayed.
12.9.2 De-activate key pad lock
• In key pad lock mode, press the - button for 3 seconds.
•A beep will confirm the deactivation and the key pad lock icon will dis-
appear.
PTT
PTT
You can not change the speaker volume in
channel scan mode.
Only the - button and the button will
work when keypad lock is activated.
PTT
Topcom TT3600.fm Page 10 Monday, September 13, 2004 9:11 AM