Topcom 7500 manual Settings, Time & date adjustment, Self-management function

TOPCOM BPM Wrist 7500

9 Settings

9.1Time & date adjustment

In stand-by:

• Press the MODE button, the month will blink on the display.

•Press the UP or DOWN button to change the month.

•Press the MODE button to confirm the month. The day will blink on the display.

•Change the day, hours and minutes as described above, using the UP or DOWN button to change and the MODE button to confirm every setting.

After setting the minutes, the device is ready to use.

9.2Self-management function

The monitor allows you to pre-set your personalized values of blood pressure which should be recommended or decided by your physician or medical professional.

If the Systolic or Diastolic rate of the measurement is greater than your pre-set personalized level, the digit of the result on the screen will flash to alert.

Besides, either the Systolic or Diastolic rate of the measurement is equal to or less than your pre-set personalized levels, or you don’t set the personalized levels, the smiling face icon will appear and flash on screen after each measurement.

3 different personal levels can be set. The levels are related to the memory zone (see chapter 14)

To set your personal blood pressure levels:

After setting the minutes, the setting of personal Blood pressure level limits is not active. (- -) is displayed.

•Press the MODE button, the Systolis pressure limit is flashing.

•Press the UP or DOWN button to set your personal systolic pressure limit.

•Press the MODE button to confirm. The diastolic pressure level is flashing.

•Press the UP or DOWN button to set your personal diastolic pressure limit.

•Press the MODE button to confirm.

Repeat previous steps for setting the levels for memory zone 2 and 3.

After setting you personal blood pressure level, the 3 positioning system can be (de-) activated.

ENGLISH

7