Topcom 9100 Roger Beep On/Off, Key-Tone On/Off, Dual Channel Monitor function, Button Lock

Topcom Twintalker 9100

13.13 Roger Beep On/Off

After the PTT - button is released, the unit will send out a roger beep to confirm that you have stopped talking.

To set the Roger Beep.
•	Press	6 times. ‘ro’ will be displayed.
•	Press	to enable (ON) or	disable the Roger-Beep (OF).
•	Press PTT	to confirm your selection and return to the standby mode.

13.14 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.
•	Press	7 times. ‘to’ will be displayed.
•	Press	to enable (ON) or	disable the key Tones (OF).
•	Press PTT	to confirm your selection and return to the standby mode.

13.15 Dual Channel Monitor function

In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive signals transmitted on that channel and CTCSS code.

Dual Channel Monitor allows you to monitor a second channel with CTCSS code.

• Press 8 times, DCM OFF appears on the display.

• Press or to change the channel.

• Press to confirm the channel selection and go to CTCSS SUB-CHANNEL SELECTION

• Press or to change the CTCSS.

• Press PTT to confirm.

To disable the function select ‘OFF’ when setting the channel.

When the Dual Channel Monitor function is activated, the PMR will switch sequentially between the standby channel + CTCSS and the Dual Channel + CTCSS.

13.16 Button Lock

• Press and hold for 5 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.

• Press and hold again to deactivate BUTTON LOCK

12 Topcom Twintalker 9100