Topcom Twintalker 9100
13.2 Turning the Unit ON/OFF
•To activate; press and hold 
. The unit will “beep” and the LCD Screen will display the current channel, CTCSS code and time.
•To switch off; press and hold 
again. The unit will “beep” and only the time is displayed.
13.3 Adjusting Speaker Volume
The Speaker Volume can be adjusted using 
and 
. The Speaker Volume level is displayed on the LCD.
13.4 Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. When you receive a signal on the current channel, the RX icon is displayed.
In order for other people to receive your transmission, they must be set on the same channel and CTCSS code
13.5 Transmitting a Signal
• Press and hold PTT to TRANSMIT.
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the mouth and speak into the microphone.
• Release PTT when you have finished transmitting.
13.6 Changing Channels
The PMR has 8 available channels.
To change channels:
• Press |
|
| once, | the current channel number flashes on the LCD Screen. | |||
| |||||||
• | Press | or | to change the channel. |
|
| ||
• Press PTT | to confirm your selection and return to the NORMAL mode. | ||||||
• | To confirm and shift to the next option, press |
| . | ||||
| |||||||
NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS code.
ENGLISH
Topcom Twintalker 9100 | 9 |
