Topcom BUTLER 4200 Trouble shooting, Setting up a handset on another base, Symptom, Solution

Topcom Butler 4200/Twin/Triple/Quattro

DECT GAP Profile only guarentees that basic calling-functions will work correctly between different brands/types. There’s a possibility that certain services (like CLIP) will not work correctly.

7.3Setting up a handset on another base

If you want to use a Butler 4200 handset with a base of another model. The base must be GAP compatible.

1.To get the base into registration mode, refer to the user manual of the base.

2.Carry out steps 3 to 9 of paragraph 7.1 “Setting up an additional handset”.

8 Trouble shooting

Symptom		Possible cause	Solution
No display		Batteries uncharged	Check the position of the
			batteries
			Recharge the batteries
No tone		Telephone cord badly	Check the telephone cord
		connected	connection
		The line is occupied by another	Wait until the other handset
		handset	hangs up
		Handset out of range	Bring the handset closer to the
The icon	flashes
			base
		The base has no power supply	Check the mains connection to
			the base
Base or handset do not		The ringing volume is zero or	Adjust the ringing volume
ring		low
Tone is good, but there		The dialling mode is wrong	Adjust the dialling mode
is no communication			(pulse/tone)
Not possible to transfer		The FLASH time is too short	Set the unit to longer flash time
a call on PABX
Telephone does not		Manipulation error	Remove the batteries and put
react when pressing the			them back in place
keys

24 Topcom Butler 4200/Twin/Triple/Quattro