Topcom Diablo 150/Twin/Triple/Quattro 9
Topcom Diablo 150/Twin/Triple/Quattro
ENGLISH
9.2.1 Turning Answering Machine On/Off
If the answering machine is On, the -Icon appear on the display in standby (or blink when there are
new messages) and the machine will automatically pick up the line after a number of rings (see 9.2.2
“Setting Number of Rings” on page 9). To turn it On or Off, press ‘7’.
Even if the answering machine is Off, it will automatically pick up after 10 rings to enable remote
activation (see 9.4 “Remote operation” on page10)
9.2.2 Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 6 rings. In Toll saver mode, the machine will answer
after 6 rings if there are no new messages, and after 2 rings if there are new messages. If there are no
new messages and you call your machine to check your messages remotely (see 9.4 “Remote
operation” on page 10), you can hang up after the 2nd ring. You do not need to pay connection fees and
you know that you do not have any new messages.
To check the actual number of rings, press the ‘*’-key twice. A voice will playback the current number of
rings.
Press the ‘*’ key followed by the ‘#’-key to set the number of ringing tones. Enter the number of ring you
want (2-9) or press ‘1’ for Toll saver.
9.2.3 Day setting
Press ‘0’ followed by ‘*’ to hear the actual day.
Press ‘0’ followed by ‘#’ to set the day. Enter the day ‘1= Sunday, 2= Monday...7= Saturday’
If the day is correctly entered, the unit will anounce the new setting.
9.2.4 Memory Full
If the memory is full, the answering ON/OFF icon will flash on the display rapidly (0,5 sec.
ON/OFF). If the answering machine is turned On and a call comes in, the machine will automatically play
OGM 2 (answering machine function without recorded caller message).
When listening to the messages, the internal voice will announce that the memory is full and then play
back the messages.
Erase some or all the messages after listening to them.The memory is free again.
9.2.5 Programming the security Code
The security code is a 3-digit code used to operate the machine remotely (see 9.4 “Remote operation”
on page 10). The security code is set to '123' by default. You can hear the current security code by
entering ‘9’ followed by the ‘#’-key.
To set a new security code press ‘9’ + ‘*’. Enter the new code (3 digits) after the tone and confirm with
the ‘#’-key.
9.2.6 Recording and selecting a Outgoing message
Press ‘8’ to enter the outgoing message menu. The following options are available:
‘1’ To hear main menu
‘2’ To play current set OGM
‘3’ To record OGM 1
‘4’ To record OGM 2
‘5’ To select OGM 1
‘6’ To select OGM2
‘8’ To hear OGM menu again