3
Orion
2INSTALLATION
Plug one end of the phone cable into the telephone line wall
socket and the other end into the back of the unit.
Connect the coil cord from the receiver into the side of the
phone .
ATTENTION :It depends on your telephone line whether the unit has to
be placed on tone or pulse. We advise you to put the phone on ‘tone’.
3 WALL MOUNTABLE
To fix the unit to the wall you have to take the following
steps :
1. To mount the unit to the wall, you will need a plate with two
protruding ends.
2. Put the hook (1) into the base unit (figure 1).
3. You can now mount the phone to the wall by hitching it onto
the holder (figure 2).
4. To prevent the receiver from sliding down, you have to pull up
the little hook and turn it 180°C (figure 3).
FIG. 1
FIG. 3
FIG. 2