WBR611.book Page 10 Wednesday, April 14, 2004 3:54 PM
-PPPoE to obtain IP automatically: mostly used for connecting the WBR611 to an
-enter username and password (twice)
-Click Next to proceed.
-PPPoE with a fixed IP address: PPPoE connection with fixed WAN IP address.
-enter username, password (twice) and WAN IP address
-Click Next to proceed.
-PPTP: for setting up a VPN connection: in this case the WBR611 WAN port is connected at the LAN site of another existing network !
-enter the VPN IP address, Subnet Mask and Gateway.
-enter the VPN Server IP address, PPTP Account and Password (twice).
-Click Next to proceed.
•Now you can setup the basic settings for the Wireless part.
-Select Enable to enable the Wireless LAN
-Choose an SSID and a Channel for your wireless network. Please make sure that the wireless clients will operate on the same SSID and the same channel to make wireless data communication possible.
-Click Next to proceed.
10 | Topcom Wireless Broadband Router WBR 611 |