Topfield TF 7700 HD PVR, TF 7710 HD PVR manual Select the Mode Serial menu

54 Listing Services

To use Vega, you have to prepare a RS-232 cable to link the digital receiver with your personal computer.

Plug one end of a RS-232 cable (9 pin D-sub cable) into the RS-232 port on the digital receiver, and the other end into the matching port on your computer.

Turn off the digital receiver if it is on, and then Run Vega. To import the channel data from the digital receier, perform the following steps:

1.Select the Mode > Serial menu.

2.Select the Up & Down > Upload from STB menu.

3.A box appears asking for your confirmation. Press the Upload button on it.

4.Turn on the digital receiver. Data transfer will start as soon as it is turned on.

Of course, you can open a std file instead of importing the chan- nel data from the digital receiver if you have one. When you have finished your work, you have to perform the following steps to export the channel data to the digital receiver.

1.Select the Up & Down > Download to STB menu.

2.A box appears asking for your confirmation. Press the Download button on it.

3.Turn on the digital receiver. Data transfer will start as soon as it is turned on.