CAPACITOR – REPLACEMENT

A.Shut off power at main breaker.

B.Remove rear control box cover.

C.Discharge capacitor.

D.Remove capacitor.

E.Reassemble in reverse order and check system operation.

ON/OFF SWITCH – REPLACEMENT

A.Shut off power at main breaker.

B.Remove conveyor and front control box cover.

C.Depress spring clips on sides of switch and push out.

D.Remove wires from switch and mark for reassembly.

E.Reassemble in reverse order and check system operation.

NOTE: Make sure switch housing is fully seated in control box housing.

FUSE HOLDER – REPLACEMENT

A.Shut off power at main breaker.

B.Remove rear control box cover.

C.Remove wires from fuse holder and mark for reassembly.

D.Remove mounting screws or mounting nut on fuse holder and remove fuse holder.

E.Reassemble in reverse order and check system operation.

COOLING FAN, CONTROL BOX – REPLACEMENT

A.Shut off power at main breaker.

B.Remove appropriate control box cover and conveyor if necessary.

C.Remove four mounting screws from fan frame.

D.Disconnect power cord and remove fan.

E.Reassemble in reverse order and check system operation. Check for air flow.

THERMOSTAT, COOLING FAN, REPLACEMENT

A.Shut off power at main breaker.

B.Remove conveyor and front control box cover.

C.Remove wires and mark for reassembly.

D.Remove two mounting screws and remove thermostat.

E.Reassemble in reverse order and check system operation.

BURNER BLOWER MOTOR – REPLACEMENT

A.Shut off power at main breaker.

B.Remove rear control box cover.

C.Unplug motor connector.

D.Remove three mounting screws from blower tube at burner housing.

E.Remove air shutter assembly from old motor for assembly on new motor.

F.Reassemble in reverse order and check system operation.

NOTE: Check air shutter at approximately ½ open and adjust to get a blue flame with an occasional tip of yellow under high flame. A view port in the burner assembly should be used to observe flame.

HI-LIMIT THERMOSTAT, OVEN CAVITY – REPLACEMENT

A.Shut off power at main breaker.

B.Remove conveyor and bottom finger assembly. Remove rear control box cover.

C.Remove capillary bulb from bracket in oven chamber and pull capillary tube through tube into control box.

D.Remove all wires and mark for reassembly.

E.Remove mounting nut and remove thermostat.

Impinger II – Advantage Digital Express Service Manual - Domestic

21

Page 20 Page 22
Page 21
Image 21
Toro 1131-080-A1, 1133-080-A, 1132-080-A1, TRUE Capacitor Replacement, ON/OFF Switch Replacement, Fuse Holder Replacement
Page 20 Page 22

1117-080-A1, 1117-080-A, 1130-080-A, 1131-080-A, 1132-08H-A specifications

The Toro 1133-080-A, 1132-080-A1, TRUE, 1130-080-A1, and 1132-080-A represent an innovative range of irrigation components designed to efficiently manage water distribution for both residential and commercial landscaping applications. These products stand out in the horticultural and agricultural sector due to their commitment to sustainability, flexibility, and user-friendliness.

One of the main features of the Toro 1133 series is its advanced water-saving technology, which allows users to optimize water usage effectively. This technology not only promotes conservation but also reduces water bills, making it an economical choice for users. The precision-engineered nozzle designs of these models ensure that water is delivered exactly where needed, minimizing waste and promoting healthy plant growth.

The Toro 1132 series shines with its durable construction. Designed to withstand the rigors of outdoor conditions, these components are made from high-quality materials that resist wear and tear over time. This durability is essential for users seeking long-term solutions for their irrigation needs.

Additional conveniences are integrated into the design of the Toro 1130-080-A1 and 1132-080-A models. They come equipped with easy-to-install features, making the installation process straightforward, even for those without extensive experience in irrigation systems. The user-friendly design enhances accessibility, allowing homeowners and landscapers alike to set up their watering systems with minimal effort.

Another characteristic that sets these models apart is their adaptability. Whether used in residential gardens, commercial landscapes, or agricultural applications, the Toro irrigation components can easily be adjusted to fit various layouts and watering needs. This versatility makes them suitable for a wide range of environments, ensuring that every landscape receives the irrigation it requires for optimal growth.

Lastly, the Toro brand is synonymous with innovation and excellence in irrigation technology. By choosing any of the Toro 1133-080-A, 1132-080-A1, TRUE, 1130-080-A1, or 1132-080-A systems, users can trust they are utilizing products backed by years of research and development, supported by a reputation for reliability and quality in the industry. These models not only embody the latest in irrigation technology but also reflect a dedication to eco-friendly practices, helping users achieve lush, thriving landscapes while contributing to water conservation efforts.
Top Page Image Contents