Toro 14AK81RK744, 14AQ81RP744 manual Lubrication, Engine, Front Wheels, Pivot Points & Linkage

Lubrication

WARNING: Before lubricating, repairing, or inspecting, always disengage PTO, set parking brake, stop engine and remove key to prevent unintended starting.

Engine

Refer to Engine on page 21 for instruction regarding all engine-related lubrication.

Front Wheels

Each of the front wheel axles and rims is equipped with a grease fitting. See Figure 17. Lubricate with 251H EP grease or an equivalent No. 2 multi-purpose lithium grease after every 25 hours of tractor operation.

Axle Grease Fitting

Rim Grease Fitting

Figure 17

Pivot Points & Linkage

Lubricate all the pivot points on the drive system, parking brake and lift linkage at least once a season with light oil.

Deck Idler (Model GT2200 Only)

A grease fitting can be found on the pivoting idler bracket on the deck. Lubricate with a No. 2 multi- purpose grease applied with a grease gun after every 25 hours of tractor operation. See Figure 18.

Grease Fitting

Figure 18

Deck Spindles (Model GT2200 Only)

Grease fittings can be found on the front of each deck spindle. After every 25 hours of tractor operation, lubricate with 251H EP grease or an equivalent No. 2 multi-purpose lithium grease . Using a grease gun, apply two strokes (minimum) or sufficient grease to each spindle.

25