Systems Indicator Monitor / Hour Meter

Battery

Oil

42.0 LCD

PTO

Parking Brake

(Blade Engage)

LCD

Located in the center of the tractor’s console, the systems indicator monitor records, and displays on its LCD, hours of tractor operation whenever the ignition key is rotated out of the STOP position.

The Indicator Monitor will also remind the operator of maintenance intervals for changing the engine oil. The LCD will alternately flash the recorded hours, “CHG” and “OIL” for five minutes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50-52, 100-102, 150-152, etc.). The LCD will also flash as described above for five minutes every time the tractor’s engine has been started during this maintenance interval. Before the interval expires, change the crankcase oil level as instructed in the MAINTENANCE section of this manual.

Brake

If the Brake light illuminates when attempting to start the tractor’s engine, depress the brake pedal.

PTO (Blade Engage)

If the PTO light illuminates when attempting to start the tractor’s engine, move the PTO knob into the disengaged (OFF) position.

Oil

It is normal for the Oil light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, stop the tractor immediately and check the crankcase oil level as instructed in the MAINTENANCE section of this manual.

Battery

It is normal for the Battery light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, the battery is in need of a charge or the engine’s charging system is not generating sufficient amperage. Refer to the MAINTENANCE section of this manual for the proper battery charging procedure or have the charging system checked by an authorized Toro Service Dealer.

Electric PTO /

Blade Engage Knob

To engage the power to the cutting deck or other (separately available) attachments, pull

outward on the PTO/Blade Engage knob. Push the PTO/ Blade Engage knob inward to disengage the power to the

cutting deck or other (separately available) attachments.

NOTE: The PTO/Blade Engage knob must be in the disengaged (OFF) position when starting the engine.

Cruise Control

Lever

The cruise control lever is located on the tractor dash

panel, below the steering wheel. Push the cruise control lever downward while traveling forward at a desired speed. While holding the lever down, release pressure from the drive pedal.

This will engage the cruise control and allow the tractor to remain at that speed without applying pressure to the drive pedal. Depress the brake pedal or the drive pedal to deactivate cruise control. Refer to page 17 for detailed instructions regarding cruise control.

NOTE: Cruise control can NOT be engaged at the tractor’s fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

Parking Brake

Lever

To set the parking brake, fully depress

the brake pedal and

push the parking brake lever down. Hold the lever down while taking your foot off the brake pedal. Both the parking lever and the brake pedal will then stay depressed. To release the parking brake, depress the brake pedal slightly. The parking brake lever will then return to its original position.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

14

Page 14
Image 14
Toro 14AQ81RP744, 14AK81RK744 manual Electric PTO Blade Engage Knob, Cruise Control Lever, Parking Brake Lever

14AK81RK744, 14AQ81RP744 specifications

The Toro 14AQ81RP744 and 14AK81RK744 are both exceptional lawn care machines designed to make maintaining your lawn easy and efficient. These models are well-regarded in the industry for their advanced features, durability, and user-friendly design.

The Toro 14AQ81RP744 is a powerful self-propelled lawn mower that boasts a 21-inch cutting deck, allowing it to cover considerable ground in minimal time. Equipped with a reliable OHV engine, it ensures efficient fuel combustion and impressive power, enabling it to tackle various grass types and conditions with ease. This model features a Personal Pace system, which automatically adjusts the mower's speed to match the operator's walking pace, providing an effortless mowing experience. Furthermore, the 14AQ81RP744 is equipped with a 3-in-1 cutting system, allowing users to choose between mulching, bagging, or side discharge.

Meanwhile, the Toro 14AK81RK744 model stands out with its innovative Recycler cutting technology. This feature finely shreds clippings, allowing them to decompose and return nutrients to the soil, ultimately promoting a healthier lawn. The 14AK81RK744 also sports a similarly robust engine and a 21-inch cutting width, making it perfect for both residential and commercial properties needing a dependable solution for lawn maintenance. Its lightweight design and folding handles make it a convenient choice for storage and transport.

Both models highlight Toro's commitment to user comfort and safety. The ergonomic handles ensure a comfortable grip during operation, while the adjustable cutting height feature enables users to customize their mow according to the specific needs of their lawn. Each mower is designed with an easy-start system, reducing the hassle of starting the engine.

In terms of technology, both Toro models excel in fuel efficiency and low emissions, aligning with modern environmental standards. The durable construction of these mowers ensures they can withstand the rigors of regular use, while also maintaining reliable performance over time.

In conclusion, the Toro 14AQ81RP744 and 14AK81RK744 are prime examples of efficient and effective lawn care solutions. With their powerful performance, advanced features, and thoughtful design, they are ideal for any homeowner or professional landscaper looking to achieve a beautifully maintained lawn.