Manuals / Transition Networks / Computer Equipment / Network Card

Transition Networks CPSMC0800-100 Cable Specifications, Null Modem Cable, RJ-45 Cable, Function

Models: CPSMC0810-100 CPSMC0800-100

1 30

Download 30 pages 26.95 Kb

Page 26

Cable Specifications

CPSMC08xx-100 PointSystem™ Chassis

Cable Specifications

Null Modem Cable

The Null Modem Cable is used for connecting a terminal or terminal emulator to the management module’s DB-9 connector to access the command-line interface.

The table below shows the pin assignments for the DB9 cable.

Function	Mnemonic	Pin
Carrier Detect	CD	1
Receive Data	RXD	2
Transmit Data	TXD	3
Data Terminal Ready	DTR	4
Signal Ground	GND	5
Data Set Ready	DSR	6
Request To Send	RTS	7
Clear To Send	CTS	8

RJ-45 Cable

Category 5:
Gauge:	24 to 22 AWG
Attenuation:	22.0 dB /100m @ 100 MHz
Maximum Cable Distance:	100 meters

•Straight-through OR crossover cable may be used.

•Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used.

•All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a Gigabit Ethernet network.

•Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

•Do not use flat or silver satin wire.

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

26

Image 26

Transition Networks CPSMC0800-100 Cable Specifications, Null Modem Cable, RJ-45 Cable, CPSMC08xx-100 PointSystem Chassis

Contents

CPSMC0800-100 AC-powered CPSMC0810-100 DC-powered Transition Networks CPSMC08xx-100 8-Slot PointSystem ChassisUser’s Guide revision B33270.B CPSMC08xx-100 PointSystem ChassisCompliance Information CISPR22/EN55022 Class A + EN55024 CE Mark FCC Regulations6 Troubleshooting Table of Contents3 Powering the CPSMC08xx-100 1 IntroductionCPSMC08xx-100 PointSystem Chassis 1 Introduction1.1 Description 24 hour Technical Support 1-800-260-1312 -- InternationalCPSMC08xx-100 PointSystem Chassis 1.2 Unpacking the CPSMC08xx-100 Equipmentintroduction Part Number2.1 Media Converter Slide-in-Modules 2.1.2 Calculating the Power Consumption2 Slide-in-Modules 2.1.1 Chassis Face PlatesCPSMC08xx-100 PointSystem Chassis 2.1.3 Installing the Media Converter Slide-in-Modulesslide-in-modules 24 hour Technical Support 1-800-260-1312 -- InternationalCPSMC08xx-100 PointSystem Chassis 2.2.4 Replacing the Media Converter Slide-in-Modulesslide-in-modules 24 hour Technical Support 1-800-260-1312 -- International2.2.1 Three Types of Management Modules 2.2 Management Modulesslide-in modulesCPSMC08xx-100 PointSystem Chassis 2.2.2 Installing the Management Modulesslide-in-modules 1a. CPSMM-200 Dual-Slot Master Management ModuleCPSMC08xx-100 PointSystem Chassis 2.2.3 Replacing the Management Modulesslide-in-modules 24 hour Technical Support 1-800-260-1312 -- Internationalpower supply 3 Powering the CPSMC08xx-1003.1 Primary Power Supply 3.1.1 AC Power Supply CPSMC08xx-100 PointSystem ChassisPower Terminal Block 3.1.2 DC Power Supplypower supply CPSMC08xx-100 PointSystem ChassisAC and DC Power Supplies 3.2 Auxiliary Power Supply3.2.1 AC Auxiliary Power Supply Instant Fail Over ProtectionAuxiliary Power Inlet External Power Converter 3.2.2 DC Auxiliary Power Supplypower supply CPSMC08xx-100 PointSystem Chassis4.1.2 Standard 19-inch Rack Installation 4.1 Installing the CPSMC08xx-100 Chassis4.1.1 Table-Top Installation 4 CPSMC08xx-100 Chassis24 hour Technical Support 1-800-260-1312 -- International chassisCPSMC08xx-100 PointSystem Chassis chassis 4.1.3 Grounding LugsCPSMC08xx-100 PointSystem Chassis 24 hour Technical Support 1-800-260-1312 -- InternationalCPSMC08xx-100 PointSystem Chassis 4.2 Cascade Optionchassis 24 hour Technical Support 1-800-260-1312 -- InternationalTo cascade two or more CPSMC08xx-100 chassis chassisCPSMC08xx-100 PointSystem Chassis 24 hour Technical Support 1-800-260-1312 -- InternationalLED indicators on the management module and slide-in-modules 4.3 Connecting the Slide-in-Modules to the Network4.4 Operation CPSMC08xx-100 PointSystem Chassisnetwork mgmt 5 Network Management5.1 Hardware Connections CPSMC08xx-100 PointSystem ChassisRESET CPSMC08xx-100 PointSystem Chassis DB-9 Serial PortRJ-45 Ethernet Port RESETCPSMC08xx-100 PointSystem Chassis 6 Troubleshootingtroubleshooting 24 hour Technical Support 1-800-260-1312 -- InternationalDC Power Supply Technical SpecificationsAC Power Supply WarrantyRJ-45 Cable Cable SpecificationsNull Modem Cable CPSMC08xx-100 PointSystem ChassisCPSMC08xx-100 PointSystem Chassis COAX CableCable Shield Grounding 24 hour Technical Support 1-800-260-1312 -- InternationalTransition Now Contact UsTechnical Support Web-Based SeminarsCPSMC08xx-100 PointSystem Chassis WarrantyLimited Lifetime Warranty CSI Material Management Center c/o Transition NetworksBefore making any non-warranty repair, Transition Networks requires a $200.00 charge plus actual shipping costs to and from the customer. If the repair is greater than $200.00, an estimate is issued to the customer for authorization of repair. If no authorization is obtained, or the product is deemed not repairable, Transition Networks will retain the $200.00 service charge and return the product to the customer not repaired. Non-warranted products that are repaired by Transition Networks for a fee will carry a 180-day limited warranty. All warranty claims are subject to the restrictions and conventions set forth by this document CPSMC08xx-100 PointSystem Chassis